/
For the roofing batten,there are 90 degree cutting batten and 45 degree cutting batten. So the roofing batten machine need to be designed with the 45 degree cutting system.40mm roofing batten roll forming machine with 45 degree cutting machine need to have two different cutting ...
Read more
/
Thickness: 0.3-0.8mm Material: GI PPGI Equipment type Yx40x225x675mm Expand width 914mm Working speed 10-15m/min（Cutting is not included.） Thickness of the press plate 0.3-0.8mm Control method Panasonic PLC Decoiler 5T manual decoiler Forming station 24 Stations Roller material 45#Steel finishing, Surface with chrome Shaft material and ...
Read more
/
Equipment type Yx30x30-35mm Working speed 15-25 meters per minute Pressed sheet thickness 2-2,5mm Control method Panasonic PLC Dispensing rack 2 tons of manual discharge rack Number of molding tracks 12 Roll material CR12 steel after finishing hardening HRC58-62 ° C, surface chrome treatment Shaft material ...
Read more
/
Equipment type Yx89x91mm Expanded width 376mm Working speed 8-10 m / min (excluding cutting time) Pressed sheet thickness 0.4-0,6mm Control method Panasonic PLC Discharge rack 2 tons of manual discharge rack Number of molding roads 18 Roll material Gcr15 steel after finishing, quenching HRC58-62 ° ...
Read more
/
Applicable Material Thickness:1.0-3.0mm yield strength≤G345Mpa Range of Cee purlin Height:40-80mm±1.0 Width:80-300mm±1.5 Lip:10-20mm±0.5 Forming station 16 stations Forming Rollers GCr15, heat treatment and hard chrome-plated ,HRC55-58 Main shaft material S45C, heat treatment HRC42Φ80mm Leveling roller 5 rollers Pinching device 2 Steps of pinching Punching hole Punching ...
Read more
/
The production line including :7 tons hydraulic de-coiler, feeding leveling system, front hydraulic cutting, roll forming machine, hydraulic punching machine, online crimping machine, corrugated board hydraulic shearing machine, finished product discharging table, and hydraulic station, electronic control system and other components. Cantilever internal structure.Drive ...
Read more
/
Length of the main part: About 13500 mm х 1850 mm х 1500 mm Total line is: 22 meters Weight of main part: 7.6 ton Voltage :As customer need Roller fixer : Guide pillar Drive mode: Chain Material of rollers: 45# steel with ...
Read more
/
Forming steps 13rollers/15 rollers Shaft diameter 80mm Design type Middle Plate Structural roller material 45# steel chrome plating chromium shaft material 40Cr steel Work speed 6-12m/min Transport By chain Type of cutting Hydraulic Cutting tolerance ±1mm Cutter Gcr12 Cutter quantity 2 set Working pressure 40MPA ...
Read more
/
Motor decoiler: Loading ability: 5T Decoiling width: 1200mm Inner diameter:450-550mm Power: motor expansion Moter brand: Chinese famous brand 125 Leveling system: Machine size: 2300mm width PLC control box one set Leveling roller: six upper rollers and 7 down rollers. Cutting blade thickness:1300mm Runout table plate:80x2000mm ...
Read more
/
Model Yx5x33,5-38x75mm CU Speed 15-20m/min (Not including cutting time) Thickness 0.3—0.8mm Controlling Panasonic PLC Manual De-coiler 2 ton de-coiler Roller station 14 stations （Including 1 station of reinforcing.） Post cutting 1 set Roller material Gcr15 finish machining after quenching HRC58-62℃，chromium coating. Shaft material and diameter ...
Read more
/
Compared with other domestic manufacturers, ZT steel gauge steel framing machine has below advantages: Disadvantages of other domestic light steel gauge steel framing machine : the pitch of the archway is large, and it is impossible to produce small size keels.The light steel gauge steel ...
Read more
/
Corrugated Water Tank Rollformer Silo Rollforming Machine Metal silo water tank rollforming and bending machine adopts the rollforming system and sheet bending system. First roll forming the corrugated roofing sheet, then punching the holes and curve the circle of corrugated sheet to form the cylinder silo ...
Read more